[Arch Linux] Printing ...

... suite :

Code:

bash-3.2# yaourt gutenprint
1 extra/gutenprint 5.2.3-1
    Top quality printer drivers for POSIX systems
==>  Enter n° (separated by blanks, or a range) of packages to be installed
==>  ----------------------------------------------
==>q
bash-3.2# yaourt cups     
1 extra/cups 1.3.9-4 [1.3.9-1 installé]
    The CUPS Printing System
2 extra/cups-pdf 2.5.0-1
    PDF printer for cups
3 extra/gtklp 1.2.6-5
    Tools to use and administrate CUPS
4 extra/libcups 1.3.9-3 [1.3.9-1 installé]
    The CUPS Printing System
5 extra/libgnomecups 0.2.3-4 [installé]
    GNOME cups library
6 extra/pycups 1.9.45-1
    Python CUPS Bindings
7 extra/system-config-printer 1.1.5-1
    Pygtk CUPS Configuration
8 community/apcupsd 3.14.5-1
    Apcupsd can be used for power mangement and controlling most of APC's UPS
    models on Unix and Windows machines.
9 community/cupsddk 1.2.3-3
    CUPSD Development Kit
10 community/gnome-cups-manager 0.33-6
    A CUPS manager for the Gnome Desktop Environment
11 community/hal-cups-utils 0.6.13-1
    Cups management via HAL UDIs
12 community/splix 2.0.0-1
    CUPS drivers for SPL (Samsung Printer Language) printers
13 community/system-config-printer-gnome 1.1.5-1
    Pygtk CUPS Configuration
==>  Enter n° (separated by blanks, or a range) of packages to be installed
==>  ----------------------------------------------
==>q
bash-3.2#

cups-pdf ...

Code:

bash-3.2# pacman -Sy cups-pdf
:: Synchronisation des bases de données de paquets...
 core est à jour;
 extra est à jour;
 community                351,0K  104,0K/s 00:00:03 [#####################] 100%
Résolution des dépendances...
Recherche des conflits possibles entre paquets...

Cibles: cups-pdf-2.4.8-1 

Taille totale des paquets (téléchargement):  0,02 Mo
Taille totale des paquets (installation):  0,05 Mo

Procéder à l'installation? [O/n] O
:: Récupération des paquets du dépôt extra...
 cups-pdf-2.4.8-1-i686    16,9K  156,8K/s 00:00:00 [#####################] 100%
Analyse de l'intégrité des paquets...
(1/1) Analyse des conflits entre fichiers          [#####################] 100%
(1/1) Installation cups-pdf                        [#####################] 100%
-------------------------------------------------
To use cups-pdf, restart cups and visit the cups
web interface at http://localhost:631/

You can now add a "Virtual Printer (PDF Printer)"
and use the Postscript/Generic postscript color
printer driver.

Note that cups-pdf has a configuration
file in /etc/cups. The default location for
pdf output is /var/spool/cups-pdf/$username.
-------------------------------------------------
bash-3.2#


a2ps ... et quelques autres ...

RESOLU ... n'envoie pas à l'imprimante ...
=>> ... dans /etc/a2ps/a2ps-site.conf

Code:

bash-3.2# ls | a2ps
bash: a2ps: command not found
bash-3.2# pacman -S a2ps
Résolution des dépendances...
Avertissement: Une provision a été sélectionnée (freeglut fournit glut)
Recherche des conflits possibles entre paquets...

Cibles (13): ghostscript-8.63-3  psutils-1.17-1  gsfonts-8.11-4 
            libwmf-0.2.8.4-4  libcroco-0.6.1-1  libgsf-1.14.8-1 
            librsvg-2.22.3-1  ilmbase-1.0.1-1  openexr-1.6.1-1 
            freeglut-2.4.0-3  jasper-1.900.1-1  imagemagick-6.4.6.3-1 
            a2ps-4.13c-1 

Taille totale des paquets (téléchargement):  33,94 Mo
Taille totale des paquets (installation):  71,99 Mo

Procéder à l'installation? [O/n] O
:: Récupération des paquets du dépôt extra...
 ghostscript-8.63-3-i686  22,4M 1619,0K/s 00:00:14 [#####################] 100%
 psutils-1.17-1            65,9K  744,2K/s 00:00:00 [#####################] 100%
 gsfonts-8.11-4            3,6M 1353,0K/s 00:00:03 [#####################] 100%
 libwmf-0.2.8.4-4        367,8K 1241,7K/s 00:00:00 [#####################] 100%
 libcroco-0.6.1-1        214,3K  841,0K/s 00:00:00 [#####################] 100%
 libgsf-1.14.8-1-i686    257,6K 1303,1K/s 00:00:00 [#####################] 100%
 librsvg-2.22.3-1-i686    258,5K 1113,9K/s 00:00:00 [#####################] 100%
 ilmbase-1.0.1-1-i686    313,9K 1044,5K/s 00:00:00 [#####################] 100%
 openexr-1.6.1-1-i686      3,3M 1329,1K/s 00:00:03 [#####################] 100%
 freeglut-2.4.0-3-i686    184,0K 1075,2K/s 00:00:00 [#####################] 100%
 jasper-1.900.1-1        346,3K 1347,1K/s 00:00:00 [#####################] 100%
 imagemagick-6.4.6.3...    2,1M 1087,1K/s 00:00:02 [#####################] 100%
 a2ps-4.13c-1            661,2K 1059,7K/s 00:00:01 [#####################] 100%
Analyse de l'intégrité des paquets...
(13/13) Analyse des conflits entre fichiers        [#####################] 100%
( 1/13) Installation ghostscript                    [#####################] 100%
==> To use dvipdf, you need to install tetex:
==> # pacman -S tetex
( 2/13) Installation psutils                        [#####################] 100%
( 3/13) Installation gsfonts                        [#####################] 100%
Updating font cache... done.
( 4/13) Installation libwmf                        [#####################] 100%
( 5/13) Installation libcroco                      [#####################] 100%
( 6/13) Installation libgsf                        [#####################] 100%
( 7/13) Installation librsvg                        [#####################] 100%
( 8/13) Installation ilmbase                        [#####################] 100%
( 9/13) Installation openexr                        [#####################] 100%
(10/13) Installation freeglut                      [#####################] 100%
(11/13) Installation jasper                        [#####################] 100%
(12/13) Installation imagemagick                    [#####################] 100%
(13/13) Installation a2ps                          [#####################] 100%
bash-3.2#

configuration ...

... dans /etc/profile

Code:

export PRINTER="lp"

... dans /etc/a2ps/a2ps-site.conf

Code:


#################################################################
# 1)   System dependent parameters            #
#################################################################

# Default encoding
# Options: --encoding=euc-jp
Options: --encoding=latin1

# Default medium
Options: --medium=A4


!modif

Code:

--encoding=euc-jp => --encoding=latin1

==>> actuellement :

Code:

bash-3.2# a2ps IBF.txt -o - | lp
[IBF.txt (plain): 1 page on 1 sheet]
[Total: 1 page on 1 sheet] sent to the standard output
l?identifiant de requête est Kyo-10 ( 1 fichier(s) )
bash-3.2#

Pour la suite ... dans /etc/a2ps/a2ps-site.conf

Code:


#################################################################
# 2)   Your printers                  #
#################################################################

# By default, produce Level 1 Postscript.
# Currently it only means to consider only the 13 level 1 standard
# fonts, and not the 35 standard level 2 fonts.
DefaultPPD: level1

# NOTE:
# Because sending a file to a printer is system dependent and because
# this file is meant to be system independent, there are two variables
# defined in a2ps.cfg you should use here.
# - #{lp.default}
#  Its value is typically `lp' or `lpr'.
# - #{lp}
#  Its value is typically `lp -d' or `lpr -P'.  Immediately after
#  #{lp} there should be the name of the printer.
#

### DefaultPrinter
# DefaultPrinter is the printer which is called upon `a2ps -d'.
# DefaultPrinter: | #{lp.default}
DefaultPrinter: | lp

### UnknownPrinter
# The `UnknownPrinter' is the command used when the user specified
# the name of the printer (a2ps -P <printer-name>), but <printer-name>
# is not specified below as a special case.
# <printer-name> is available here as `#o'.
UnknownPrinter: | #{lp} #o

### Some special printers.
# This section is to fill only if you want to tune your system.
# The entry `UnknownPrinter' is enough to handle any case.

# For instance, I want to specify that arlette is a Level 2 Postscript
# printer.  I specif no command, so the `UnknownPrinter' command will
# be used.
#Printer: arlette level2

# dominique is a level 2 Postscript _without_ Duplex support.
# Here I *want* a special command, not that of the UnknownPrinter.
# We use the shell script psmandup to simulate Duplex.
#Printer: dominique level2 | #?d#psmandup -n|## #{lp} dominique

# This is just to show that any command can be used.  Instead of
# printing, the output is piped in `wc'.
#Printer: wc | wc -l

# You can also save in a file if you wish.
#Printer: netscape >netscape.ps

# This example uses the fact that `$N' expands in the input file name,
# so a2ps foo -P gzip will save the output in foo.ps.gz.
#Printer: gzip | gzip -c > $N.#..gz


!modif

Code:

DefaultPrinter: | #{lp.default} ==>> DefaultPrinter: | lp

CUPS ...

http://wiki.archlinux.org/index.php/CUPS_Setup
http://math.univ-lille1.fr/~hafidi/cups_printing.txt

Code:

bash-3.2# pacman -S cups
Résolution des dépendances...
Recherche des conflits possibles entre paquets...

Cibles (6): openslp-1.2.1-1  xdg-utils-1.0.2-1  libcap-1.10-2 
            libdaemon-0.13-1  avahi-0.6.23-2  cups-1.3.9-1 

Taille totale des paquets (téléchargement):  4,19 Mo
Taille totale des paquets (installation):  19,42 Mo

Procéder à l'installation? [O/n] O
:: Récupération des paquets du dépôt extra...
 openslp-1.2.1-1          124,7K 1034,9K/s 00:00:00 [#####################] 100%
 xdg-utils-1.0.2-1        44,3K  570,0K/s 00:00:00 [#####################] 100%
 libcap-1.10-2            27,0K  482,0K/s 00:00:00 [#####################] 100%
 libdaemon-0.13-1-i686    22,4K  334,4K/s 00:00:00 [#####################] 100%
 avahi-0.6.23-2-i686      728,2K 1524,1K/s 00:00:00 [#####################] 100%
 cups-1.3.9-1-i686          3,3M 1342,1K/s 00:00:02 [#####################] 100%
Analyse de l'intégrité des paquets...
(6/6) Analyse des conflits entre fichiers          [#####################] 100%
(1/6) Installation openslp                          [#####################] 100%
(2/6) Installation xdg-utils                        [#####################] 100%
(3/6) Installation libcap                          [#####################] 100%
(4/6) Installation libdaemon                        [#####################] 100%
(5/6) Installation avahi                            [#####################] 100%
adding avahi system group... done.
adding avahi system user... done.
==> The following daemons may be added to DAEMONS in /etc/rc.conf:
 -> avahi-daemon  - the mdns responder, you probably want this.
                    dbus needs to be running when you start it.
 -> avahi-dnsconfd - daemon used for peer-to-peer automatic dns
                    configuration on dhcp-less networks.

==> To use some of the client applications you will have to install python.
 -> In addition, pygtk is required for the graphical ones and
    twisted-web for avahi-bookmarks.

Dépendances optionnelles pour avahi
    qt3:Qt3 UI support
    libglade:Avahi-discover-standalone
    nss-mdns:NSS support for mDNS
(6/6) Installation cups                            [#####################] 100%
bash-3.2#

config CUPS ...
lancer le daemon ...

Code:

/etc/rc.d/cups start


accéder au site web du serveur ...

Code:

firefox http://localhost:631/

... ajouter une imprimante.

aller chercher le fichier ppd s'il manque ...

Code:

http://www.linuxprinting.org/download/PPD/

finir la configuration ...

Audit ...

Code:

bash-3.2# yaourt cups                     
1 extra/cups 1.3.9-1 [installé]
    The CUPS Printing System
2 extra/cups-pdf 2.4.8-1
    PDF printer for cups
3 extra/gtklp 1.2.6-4
    GtkLP and GtkLPQ are two tools to use and administrate CUPS a better way.
4 extra/libcups 1.3.9-1 [installé]
    The CUPS Printing System
5 extra/libgnomecups 0.2.3-3
    GNOME cups library
6 community/apcupsd 3.14.4-1
    Apcupsd can be used for power mangement and controlling most of APC's UPS
    models on Unix and Windows machines.
7 community/cupsddk 1.2.3-3
    CUPSD Development Kit
8 community/gnome-cups-manager 0.33-4
    A CUPS manager for the Gnome Desktop Environment
9 community/hal-cups-utils 0.6.13-1
    Cups management via HAL UDIs
10 community/pycups 1.9.42-2
    Python CUPS Bindings
11 community/splix 1.1.1-2
    CUPS drivers for SPL (Samsung Printer Language) printers
12 community/system-config-printer 1.0.12-1
    Pygtk CUPS Configuration
13 aur/bjfiltercupsi250 2.3-1
    Bjfiltercups for canon i250
14 aur/brother-hl2030 2.0.1-1
    Brother HL-2030 CUPS driver
15 aur/brother-mfc210c-cupswrapper 1.0.2_3-1
    Brother LPR-to-CUPS wrapper for MFC-210C and compatible printers
16 aur/brother-mfc210c-fixed-version 1.0.0-3
    Brother CUPS driver: DCP-115C, DCP-117C, DCP-120C, DCP-315CN, DCP-340CW,MFC-215C, MFC-425CN, MFC-640CW, MFC-820CW and MFC-210C
17 aur/brother-mfc240c 1.0.1-1
    CUPS driver for Brother MFC-240C printer
18 aur/brother-mfc260c 1.0.1-1
    CUPS driver for Brother MFC-260C printer
19 aur/brother-mfc260c-cupswrapper 1.0.1_1-2
    Brother LPR-to-CUPS wrapper for MFC-260C and compatible printers
20 aur/cjlz35le-cups 2.0_1-1
    Lexmark z35 printer driver for CUPS
21 aur/cnijfilter-mp210 2.80-1
    Canon PIXMA MP210 printing driver for CUPS
22 aur/cups-bjnp 0.4-1
    CUPS backend for the canon proprietary network printing protocol, BJNP.
23 aur/cups-lexmark-700 1.1.1-1
    Lexmark Z700/P700/P3150 Printer Driver
24 aur/cups-mc2430dl 1.6.0-1
    CUPS driver for Konica Minolta magicolor 2430 Desklaser printer
25 aur/cups-mc5430dl 1.8.0-2
    CUPS driver for Konica Minolta magicolor 5430 Desklaser printer
26 aur/cups-mc5440dl 1.2.0-1
    CUPS driver for Konica Minolta magicolor 5440 Desklaser printer
27 aur/cups-xerox 2007.10.04-1
    Drivers for various Xerox printers
28 aur/dcp130c 1.0.1-1
    CUPS driver for Brother DCP-130C printer
29 aur/epson-c65_c66-epkowa-driver 2.6.2_2-2
    Cups closed-source driver for Epson C65 and C66 printers made by epkowa
30 aur/fax4cups 1.28-1
    A simple shell script that acts as a CUPS backend for a serial faxmodem.
31 aur/gkrellmapcupsd 0.02-1
    gkrellm plugin that display info about a wired apc ups
32 aur/lexmarkz-cups 1-4
    Lexmark Z35, Z55, Z65, Z600 and Z700 Printer Drivers for CUPS
33 aur/m2300w 0.51-2
    CUPS driver for the Minolta/QMS magicolor2300w
34 aur/pstocanonbj 3.3-1
    Filter called by CUPS to exec bjfilter
35 aur/samsung-scx4200 2.00.97-1
    Samsung SCX-4200 CUPS driver
36 aur/samsung2010p 2.00.97-1
    Samsung ML-2010P CUPS driver